Global| sitemap
AK4691
Low Power 2ch ADC & 4ch DAC with MIC/HP/SPK-Amp
The AK4691 is a 16bit, 4ch ADC and 2ch DAC with Microphone-Amplifier, Headphone-Amplifier, and Speaker-Amplifier. The recording block corresponds to supports 4-channel inputs, and also has 3-input selector for Internal/External MIC and LINE, output power for Microphone, Pre-Amp, and ALC (Automatic Level Control) circuit. The playback bock has Lineout-Amplifier, Headphone-Amplifier, and Speaker-Amplifier. The AK4691 is suitable for portable applications such as built-in LCD. The AK4691 is available in a 57pin BGA, utilizing less board space than competitive offerings.
Logo
  1. Applications: Digital video cameras, Digital still cameras and Array microphones
  2. Recording Function
    • 4-channel Single-ended Pre-Amp
      (Pre-Amp Gain: 0dB, +18dB, +20dB, +24dB or +28dB)
    • 2-channel Line Input
    • 3-input Selector (Internal MIC, External MIC or LINE)
    • 4-channel Digital ALC (Automatic Level Control)
    • ADC Performance: S/(N+D): 82dB, DR, S/N: 90dB (Pre-Amp=+24dB)
      S/(N+D): 85dB, DR, S/N: 90dB (LINE)
    • Wind-noise Reduction Filter
    • Stereo Separation Emphasis
    • Fade-in/out Function
  3. Playback Function
    • Digital De-emphasis Filter (tc=50/15 μs, fs=32kHz, 44.1kHz, 48kHz)
    • Digital Volume (+12dB ~ - 115.0dB, 0.5dB Step, Mute)
    • Digital ALC (Automatic Level Control)
    • Stereo Separation Emphasis
    • Stereo Line Output
      - Performance : S/(N+D): 85dB, S/N: 90dB
      - Output Level: -3.9dBV @ AVDD=LVDD=3.0V, LVOL=0dB
      +2dBV @ AVDD=3.0V, LVDD=4.5V,
      LVOL=+5.9dB
    • Stereo Headphone-Amp
      - S/(N+D): 70dB, S/N: 90dB
      - Output Power : 58mW @ 16Ω (LVDD=3.3V)
      - Pop Noise Free at Power ON/OFF
    • Mono Speaker-Amp
      - S/(N+D): 50dB@240mW, S/N: 90dB
      - BTL Output
      - Output Power: 400mW @ 8Ω (SVDD=3.3V)
    • Analog Mixing
  4. Power Management
  5. Master Clock :
    (1) PLL Mode
    • Frequencies :
      11.2896MHz, 12MHz, 12.288MHz, 13.5MHz, 24MHz, 27MHz (MCKI pin)
      1fs (LRCK pin)
      32fs or 64fs (BICK pin)
    (2) External Clock Mode
    • Frequencies : 256fs, 512fs or 1024fs (MCKI pin)
  6. Output Master Clock Frequencies : 32fs/64fs/128fs/256fs
  7. Sampling Rate:
    • PLL Slave Mode (LRCK pin): 7.35 kHz ~ 48k Hz
    • PLL Slave Mode (BICK pin): 7.35 kHz ~ 48k Hz
    • PLL Slave Mode (MCKI pin):
      8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz,
      44.1kHz, 48kHz
    • PLL Master Mode:
      8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz,
      44.1kHz, 48kHz
    • EXT Slave Mode:
      7.35 kHz ~ 48kHz (256fs), 7.35 kHz ~ 48kHz (512fs),
      7.35kHz ~ 13kHz (1024fs)
  8. μP I/F: 3 -wire Serial , I2 C Bus (Ver 1.0, 400kHz Fast-Mode)
  9. Master/Slave mode
  10. Audio Interface Format: MSB First, 2's complement
    • ADC: 16bit MSB justified , I2S, TDM Mode
    • DAC: 16bit MSB justified, 16bit LSB justified , 16-24bit I2S, TDM Mode
  11. Ta = - 30 ~ 85 ° C
  12. Power Supply Voltage:
    • Analog (AVDD), Digital (DVDD): 2.6 ~ 3.6V
    • MIC ( MVDD): 2.6 ~ 5.5V
    • Lineout & Headphone ( LVDD): 2.6 ~ 5.5V
    • Speaker (SVDD): 2.6 ~ 3.6V
    • Digital I/F ( TVDD1, TVDD2): 1.6 ~ 3.6V
  13. Package: 57pin BGA (5mm x 5mm, 0.5mm pitch, height: 1.0mm)
  14. Evaluation Board: AKD4691
AK4691 BLOCK DIAGRAM
AK4523 Diagram
Data Sheet PDF
Datasheet

Data Sheets
Rev. MS0672-E-00 2007/11
PDF : 1011KB / 80pages

Evaluation Board Manual
Evalution Board Manual
Rev. KM089100 2007/06
PDF : 1983KB / 68pages
  • AKEMD Product Guide

Mixed-Signal IC's

2008 Product Guide Available NOW!

Download the PDF File (5.6MB ZIP File) by clicking here.